← Back

STK0080+

Replaces STK0060/70/80 in Fisher CA-880, RS-2010, SR6000, and IG0297

This module is listed for individual sale.

Ready to use STK0080+ module replaces the Sanyo STK0060, STK0070, STK0080, but more robust.

NOTE: The STK0030/40/50 family is smaller than the STK0060/70/80 family.

Compact design, drop in mounting like the original Sanyo STK0080. With just six solder connections, it takes a professional tech about 15 minutes to replace the module in a Fisher CA-880. Typical current gain 8,000-20,000 vs original 5,000. 15A output compared to the original 7A STK0060/70 or the 10A STK0080. These same power transistors are used in the 140 watt per channel Marantz SR8012 and Denon AVR-X7200w.

Measured performance in CA-880 at 400 Hz.

% distortion	@ watts
0.0097	0.8
0.0039	8.0
0.0032	16
0.0032	32
0.0033	80

Two channels is 0.0020% at 100 W. This is way more than specified. One channel driven is 120 W 0.0019% 400 Hz!

Noise

-74 dBV

22-22K

s/n 103 dB

• NO bias adjustment, preset during testing.
• NO paste needed, we supply silpads.
• NOT 35 years old or counterfeit. Sanyo quit making these in 1983.
• YES, tested in our modified Fisher CA-880.
• YES, 4 ohm speakers. We use 15 amp outputs.
• YES, gold-plated PCB. PCB Finish, ENIG (Gold), compliant with IPC-4552.
• YES, free USPS shipping in the USA.

Hand tools and simple solder skills required. Technical knowledge required. No returns and limited support, this is not for beginners. We do supply instructions and helpful test tips.